KONIG+NEURATH TALO.S Konferenz, Assembly Instructions Manual

Page: 35 / 48

32
Safety instructions
Lay the hand that is not operating the desk on the table top
„two
-
handed operation”.
Make sure that no - one is at or under the desk when lifting
and lowering.
During lowering make sure that no objects such as waste
bins or pedestals become wedged under the desk.
As soon as the electronic collision protection has stopped
the electric height
- adjustable desk from moving, you can
then only adjust the desktop in the opposite direction (the
safety feature initially prevents you from adjusting the desk
in the same direction as triggered it).
To prevent the risk of crushing and shearing, the desk and
all of its moving parts (incl. attachments and accessories)
must have a clearance of at least 25mm to adjacent objects.
When lowering past the programmed safety stop, note that a
pinch point can arise between the desk top frame, cable tray
and the motor strut.
Caution! Desks are more liable to tipping in the highest posi-
tion than in the lower ones.
The max. permissible net load is 80 kg.
The desk is not suitable for transporting people.