Work Smart ECH91211, Operating Instructions

Page: 1 / 2

ECH91211 / ECH91216 / ECH91217
FAUTEUIL DE DIRECTION À DOSSIER BAS
INSTRUCTIONS DE MONTAGE
ECH91211 / ECH91216 / ECH91217
EXECUTIVE LOW BACK CHAIR
OPERATING INSTRUCTIONS
WORK SMART LIMITED WARRANTY
Work Smart chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• 15 Years on all non-moving metal parts.
• 5 Years on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
• Leather is not warranted against routine scratching and scuffing, as leather is subject to minor blemishes in use.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and obtain return authorization.
At it’s option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return freight on components
still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or
less. The BC9601 is for persons weighing 300 lbs. or less. The BC9602 is for persons weighing 400 lbs. or less. The BC9603 is for persons weighing 500 lbs.
or less. EX1098, EC1283C & ECH12801 are for persons weighing 350 lbs. or less. This warranty will not cover labor, freight or damage from misuse, abuse,
negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star Products. The warranty does not cover
cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded. The user assumes all risk of injury resulting
from use of this product. When usage is more than 40 hours per week, a two year warranty on all parts applies. Fabric is warranted for one year. This warranty
gives you specific legal rights, and you may also have other rights which vary from state to state.
All Work Smart chairs are built to meet or exceed ANSI BIFMA standards.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our
Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail parts@officestar.net , by Fax 1-909-930-5629, or toll free
parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time.
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and pull lever (1) up.
To lower seat height sit on chair and pull lever (1) up.
NOTE: It is normal for chair to slightly lower under body weight.
• LOCKING TILT ADJUSTMENT
For individual comfort, this chair has been equipped with an
adjustment that will allow the user to change the tension of
the tilting feature. Turn knob (2) clockwise to increase tension
and counter-clockwise to decrease or ease the tension. To lock
return chair to the upright position and push lever (1) in. To
unlock pull lever (1) out.
NOTE: Be careful not to loosen back tilt adjustment knob completely.
• ADJUSTABLE ARMS
- Flip Arm: To flip arm, simply pull up on arm. To lower arm,
simply pull down on arm.
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and knobs are
securely tightened.
3. Check that all bolts screws and knobs are tight every three
months or as needed.
4. Do not overturn back tilt knob when decreasing tension.
5. Dispose of packing material properly. Do not use plastic cover
as head covering. It may cause suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.
2
1
© Office Star Products septembre 2017
ÉTAPE 1 ÉTAPE 2
ÉTAPE 4 ÉTAPE 5 ÉTAPE 6
ÉTAPE 3
PIÈCE QTÉ
1.
Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
2.
Roulettes . . . . . . . . . . . . . . . . . . . . . . . . . . .5
3.
Vérin pneumatique . . . . . . . . . . . . . . . . . . .1
4.
Souflett . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
5.
Plaque du siège . . . . . . . . . . . . . . . . . . . . . .1
6.
Coussin du siège . . . . . . . . . . . . . . . . . . . . .1
7.
Dossier . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
8.
Bras (8L et 8R) . . . . . . . . . . . . . . . . . . . . . .2
9.
Vis de plaque du siège longues . . . . . . . . . .2
10.
Vis de plaque du siège courtes . . . . . . . . .2
11.
Vis de bras . . . . . . . . . . . . . . . . . . . . . . . . .8
12.
Bouchon en plastique . . . . . . . . . . . . . . . .6
13.
Casquette en plastique . . . . . . . . . . . . . . .2
14.
Clé allen (non montré) . . . . . . . . . . . . . . . .1
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vérifier
que les quantités des pièces reçues sont correctes.
ÉTAPE 1
Insérer cinq roulettes (2) dans la base (1), les pousser très fort jusqu’à ce que vous entendiez ou sentiez la
roulette (2) s’enclencher. Insérer le cylindre pneumatique (3) dans la base (1) et glisser les soufflets (4) sur
le cylindre pneumatique (3).
ÉTAPE 2
Fixez la plaque du siège (5) au coussin du siège (6) avec la flèche vers l’avant de la chaise avec duex vis
plaque du siège longues (9) pour le l’avant de la plaque du siège (5) et duex vis plaque du siège courtes (10) pour le dos de
la plaque du siège (5).
SERREZ TOUTES LES VIS AVEC LA CLÉ ALLEN (14).
ÉTAPE 3 Placer le coussin du siège (6) sur le dessus du Vérin pneumatique (3) et pousser vers le bas.
ÉTAPE 4 Aligner les trous des bras (8R) avec les trous des coussin du siège (6) et dossier (7), sécurisé le bras (8R)
avec quatre vis de bras (11).
NE PAS SERRER LES VIS.
ÉTAPE 5
Aligner les trous des bras (8L) avec les trous des coussin du siège (6) et dossier (7), sécurisé le bras (8L)
avec quatre vis de bras (11). APPLIQUEZ UNE FORTE PRESSION POUR ALIGNER ET SERRER ENTIÈREMENT
TOUTES LES VIS AVEC CLÉ ALLEN (14).
ÉTAPE 6
Couvrir les trous des Bras (8R et 8L) avec trois bouchons en plastique (12) et un casquette en plastique
(13) pour chaque Bras (8). Tournez le bouchon en plastique (13) dans le sens des aiguilles d’une
montre pour le serrer.
ATTENTION: AVANT D’UTILISER LE FAUTEUIL, S’ASSURER D’AVOIR SERRÉ COMPLÈTEMENT TOUTES LES VIS.
2
1
12
12
3
3
4
11
11
9
13
13
8R 8L
6
10
6
7 7
5