KONIG+NEURATH TALO.S Konferenz, Assembly Instructions Manual

Page: 40 / 48

37
Possible cause Remedy
Mains power breakdown or
mains power is plugged off
during movement
Manual reset *)
Control unit is defective Contact customer service
Handswitch is defective Replace the handswitch
Drive is defective Contact customer service
Possible cause Remedy
Power cord is not connected Plug the power cord into the
control unit
Handswitch is not connected Plug in the handswitch
Control unit is defective Contact customer service
Power cord is defective Contact customer service
Handswitch is defective Replace the handswitch
Poor plug contact Connect the plugs properly
Possible cause Remedy
Power cord is not connected Plug the power cord into the control unit
Drives are not connected Plug the motor cables into the control unit
Poor plug contact Plug the motor cables, power cord and
handswitch in properly
Control unit is defective Contact customer service
Handswitch is defective Replace the handswitch
Drives only operating in one direction
*) If movement is only possible downwards
Drives not working
Possible faults and remedies