background image

0

1

M

A

N

U

E

L

A

I

R

E

S

M

A

T

E

U

S

PARTS

1x Tabletop

2x Leg frames

2x Side beams

HARDWARE

(6x) Universal connector   

(6x) Metal dowel 

 

 

(8x) M8x65 Caphead screw   

(8x) M8 Washer 

  

YOU WILL NEED

-6mm Allen Key

-The help of 3 or 4 friends

NOTES

NOTE 1: Be certain that all assembly is carried out on a flat 

and stable surface. This will ensure a good final result. 

Reverse the steps to disassemble the piece.

NOTE 2: Your furniture arrives packed in numerous layers that 

protect it during transport. It is important that you remove 

the packaging carefully to avoid damaging your furniture. Refer 

to our information sheet “Unpacking Your Furniture” for further 

details.

NOTE 3: Great care is required when assembling our products. 

Use blankets to soften the assembly surface - hard surfaces 

such as wood or stone flooring may damage the furniture if in 

direct contact.

NOTE 4: We advise that assembly and disassembly is undertaken 

by a minimum of 4 people. 

NOTE 5: When screwing in bolts, tighten well, but be sure 

NOT TO OVERTIGHTEN. This can cause the thread to strip thus 

resulting in a poor connection.

NOTE 6: While you work, be sure all connections are flush with 

no gaps. 

NOTE 7: After assembly, ensure that the table is resting on a 

level surface.

ASSEMBLY INSTRUCTIONS

TABLE ONE BY MANUEL AIRES MATEUS 

[email protected]

DELAESPADA.COM

Summary of Contents for TABLE ONE








Reviews: