Konica Minolta Vivid 910, Instruction Manual

Page: 34 / 64

32
Scanning the Object
• The lens is replaced.
• The power switch is set to OFF.
9 To scan again, repeat steps 1 to 8.
M
emo
If the scan results are not satisfactory, try the following:
• Adjust the laser power manually.
• Adjust the CCD gain.
• Set the scan reference distance.
• Adjust white balance.
· For a description of adjusting the laser power and CCD gain, refer to page 37.
· For a description of setting the scan reference distance, refer to page 39.
· For a description of adjusting white balance, refer to page 43.
Displaying the Scan Results
When an image is captured, scan results (range image data) will be displayed on the viewfinder.
1
Range image
2
Effective scan range (back-forth direction) ....Displays the allowed scan range.
3
Scan mode ..........................................................Displays the scan mode (FINE or FAST).
4
File name ............................................................Displays the file name set in “AUTO [ ]” of “FILE
NAME” in the CARD SETTING view.
No file name will be displayed if “INTERACTIVE” has
been selected.
5
Remaining memory capacity ............................Displays the remaining capacity of the memory card (in
MB).
6
Scan reference position .....................................Displays the distance from the front of the lens to the focus
position.
Pressing or will display the color image data on the viewfinder. Pressing it again will display the range
image data.
R
ef.
5
4
1
2
3
6
Vivid910-hard-E.book Page 32 Thursday, September 25, 2003 6:49 PM