Konica Minolta Vivid 910, Instruction Manual

Page: 43 / 64

41
Scanning the Object
Setting Auto Read
With certain objects, a better image can sometimes be acquired if the condition of the laser beam emitted to
scan a range image differs from that emitted to scan a color image.
In this case, set Auto Read to OFF as explained below.
[Operating Procedure]
1 Press .
The MENU view will appear.
2
Press to locate the arrow cursor to
“CAMERA SETTINGS”.
3
Press .
The CAMERA SETTINGS view will appear.
4
Press to locate the arrow cursor to “AU-
TO READ”.
5
Press .
The currently set auto read mode (ON or OFF) will
turn to pink.
6
Press to select “OFF”.
7 Press .
Auto Read mode will be set to OFF.
M
emo
If Auto Read is set to OFF, no color image will be scanned even though is pressed to scan. To scan a color
image, press again.
Vivid910-hard-E.book Page 41 Thursday, September 25, 2003 6:49 PM