Konica Minolta Vivid 910, Instruction Manual

Page: 51 / 64

49
Data File Management
Changing a File Name
File names of the data stored in the memory card can be changed.
[Operating Procedure]
1
Select the data whose file name is to be changed.
For a description of selecting a file, refer to page 48.
2
Press .
A file edit view will appear.
3
Press to locate the arrow cursor to
“CHANGE FILENAME”.
4
Press .
The last character of the selected file name will turn to
pink.
5
Press to select the character to be
changed.
M
emo
Moving through the prefix file name from one character to
another by pressing
, the character located right on
will be cleared.
6
Press to select the desired new character.
M
emo
Characters can be selected from alphabets (A to Z) and numbers (0 to 9).
7
Repeat steps 5 and 6 to complete the desired file name.
M
emo
To cancel changing the file name and restore the original file name, press .
8
Press .
The file name will be changed.
The view shown at step 1 will reappear.
R
ef.
Vivid910-hard-E.book Page 49 Thursday, September 25, 2003 6:49 PM