Konica Minolta Vivid 910, Instruction Manual

Page: 61 / 64

59
Specifications
Model Name Non-contact 3D digitizer VIVID 910/VI-910
Measurement Method Triangulation, light-stripe method
AF Image surface AF (contrast method), Active AF
Light-Receiving lens
(exchangeable) TELE : Focal distance f=25 mm
MIDDLE: Focal distance f=14 mm
WIDE
: Focal distance f=8 mm
Object Distance Range 0.6 to 2.5 m (2 m for WIDE lens)
Field of View 0.6 to 1.2 m
Laser Power Max. 30 mW, 690 nm
*IEC Class 2 (for Europe) with IEC PUBLICATION 60825-1:1993, Amendment-1:1997
*FDA Class I (for US.) with 21CFR chapter 1, Subchapter J.
Laser Scanning Method Galvano mirror
Scan Mode FAST (high-speed mode)/FINE (high-accuracy mode)
High quality mode
Dynamic range mode
(Selectable when measurement is taken using the Polygon Editing Tool Software
(standard accessory))
X Direction Input Range
(Varies with the distance) 111 to 463 mm (TELE), 198 to 823 mm (MIDDLE),
359 to 1196 mm (WIDE)
Y Direction Input Range
(Varies with the distance) 83 to 347 mm (TELE), 148 to 618 mm (MIDDLE),
269 to 897 mm (WIDE)
Z Direction Input Range
(Varies with the distance) 40 to 500 mm (TELE), 70 to 800 mm (MIDDLE),
110 to 750 mm (WIDE/FINE mode)
Accuracy TELE X: ±0.22 mm, Y: ±0.16 mm,
Z: ±0.10 mm to the Z reference plane
MIDDLE X: ±0.38 mm, Y: ±0.31 mm,
Z: ±0.20 mm to the Z reference plane
WIDE X: ±1.40 mm, Y: ±1.04 mm,
Z: ±0.40 mm to the Z reference plane
(Conditions: FINE mode, distance 0.6 m, KONICA MINOLTA SENSING’s standard
3D chart, KONICA MINOLTA SENSING’s processing software, temperature 20ºC,
relative humidity 65% or less)
Precision (Z,
σ,
Typ.) TELE 8 μm, MIDDLE 16 μm, WIDE 32 μm
(Conditions: FINE mode, distance 0.6m, KONICA MINOLTA SENSING’s standard
2D chart, KONICA MINOLTA SENSING’s processing software, temperature 20°C,
relative humidity 65% or less)
Input Time 0.3 sec. (FAST mode), 2.5 sec. (FINE mode),
0.5 sec. (COLOR)
Image Data Transfer Time to
Computer Approx. 1 sec. (FAST mode), 1.5 sec. (FINE mode)
Allowed Environmental
Light 500 lx or less
Imaging Device 3D data : 1/3-inch frame transfer CCD (340,000 picture elements)
Color data : 3D data is shared (color separation by rotary filter)
Output Data Points 3D data : 640 × 480 (FINE mode)
320 × 240 (FAST mode)
Color data : 640 × 480
Output Format 3D data : Original format
(Converted to 3D by the standard utility software)
Color data : RGB 24-bit raster scan data
Memory Media ATA PC card Type II
Data Capacity 1.6MB/card (FAST mode), 3.6MB/card (FINE mode) (in total of 3D data and color data)
Viewfinder 5.7-inch LCD (320 × 240 picture elements)
* There may be rare cases in which the point that is normally lit or unlit may break up
(dot break up); however, this will not have any influence on the scanning data.
Output Interface SCSI II (DMA synchronous transfer)
Vivid910-hard-E.book Page 59 Thursday, September 25, 2003 6:49 PM