Konica Minolta MS 2000, Installation And User Manual

Page: 9 / 59

whe
pris
a the MS 6000’s front panel. If the
Automatic Image Rotation Kit is not installed, disabled or malfunctioning then this check
box will be
The Preview W
The preview window can be a very useful tool and provides a range of functionality that makes
workin
compon
Rul
the
left
ind
cen
Left clicking on this box
of
mea
The
represents the entire 12” x 12” scan area of the
MS 6000. Within the preview window will be
an utlined
the actual area that the scanner is currently set to
capture. This outline can be changed and
manipulate
d most common way is to select a preset
paper size Once a paper size is selected it will be
represented have more control over the scan area
can either resize the box or click and-drag a new rectangle. To resize the box first hover the
mouse over an edge or corner until the m
down the l
r corner to the desired location. An even
easier way x and drag-and-drop the mouse to create
the desired ght click on the inside of the box and drag
the entire scan area anywhere in the 12” x 12” window.
When the
masking kit is installed on your MS 6000, the LED buttons
along the edge will light to match the defined scan area in the preview window – even if
you drag and drop the preview area to another location! In addition, the lighted buttons can
be selected
m of 4”
per side). T d displayed in the
preview window.
ARS Controller Buttons
hese series of buttons allow users to interface with a connected MARS 4 or MARS Mini-2
ontroller to control the movement and searching of blipped film. The controls within the
WAIN driver only offer minimal support for film movement and searching. There is no
pport in the TWAIN driver for automated batch-scanning of blipped film.
n no grayscale option is installed) then all deskewing will be done mechanically via the
m lens. Automatic deskewing can also be selected vi
grayed out.
indow
g with the MS 6000 easier and faster. The preview window is comprised of two key
ents:
ers – A horizontal ruler runs along the top of
window while a vertical ruler runs along the
edge. The box in the upper left corner
icates which form of measurement (inches or
timeters) is currently being used for the ruler.
will switch the form
surement between inches and centimeters.
Window – The preview window itself
o rectangle. This outline represents
d in a variety of ways. The easiest an
from the paper size drop-down box.
in the preview window. Users wishing to
ouse pointer changes to a resize tool then hold
eft mouse button and drag that edge o
is to simply right click outside the bo
size scan area. At any time you can ri
ptional manual o
manually from the front panel to define any custom scan area (minimu
he resultant defined area will be transferred to the driver an
M
T
c
T
su