Dual –
When in dual mode the MS 7000 will automatically divide the total scan
area into two 8 ½” wide by 12” high scan areas. When the actual scan takes
place one image from each of these scan areas can be delivered using the Scan
. Please
nd right
d in the scanner prior to delivery to the
application. With this setting you scan 2 images, each of which can be up to an
n Black and White and does
not support automatic masking or automatic centering.
mode is only available when scanning in Black
and White.
Stack R/L Actual
– This setting is the same as Stack L/R Actual except that the
right-hand image will be placed above the left-hand image.
This mode is only
available when scanning in Black and White.
Resolution (DPI)
– This drop-down box allows you to select the resolution at which the
scanner will deliver data to the scanning software. The resolution is measured in Dots
Per Inch or DPI. Available settings for the MS 7000 are 200, 300, 400, and 600 DPI.
The MS 7000 will also support 800 DPI scanning but
in order to select 800 DPI the
defined scan area must have a height of no greater than 8 ½”
. Thus a letter
landscape, legal landscape or check-sized scan area will accept an 800 DPI setting
while a letter portrait or ledger-sized scan area will be resized to an 8 ½” high image.
All button (
see below
) or the Start button on the MS 7000’s front panel
note that the scan areas, scan positions and scan settings in the left half a
half will always be the same. Thus any size adjustments to one scan area will be
copied in the other.
When in Dual Scan Mode you cannot set the custom
scan area by using the Manual Masking LED lights on the Scanner’s Front
panel
(
see the Preview Window below for more information
).
Stack L/R Letter
– This setting is similar to Dual scan mode except that the two
separate scans will be vertically merge
8 ½” x 5 ½”. These two images are then vertically merged into a single 8 ½” x
11” image. The left-hand image will be placed above the right-hand image.
This mode is only available when scanning i
Stack R/L Letter
– This setting is the same as Stack L/R Letter except that the
right-hand image will be placed above the left-hand image.
This mode is only
available when scanning in Black and White and does not support
automatic masking or automatic centering.
Stack L/R Actual
– This setting is exactly the same as Stack L/R Letter except
that rather than returning an 8 ½” 11” image the returned image will be the
exact size of the two stacked image. For example, two 5” x 5” images will be
returned as a single 5” x 10” image. The left-hand image will be placed above
the right-hand image.
This
Summary of Contents for MS 2000
Page 52: ......
