Konica Minolta IP-601, Instruction Manual, Page: 85 / 131

Print Controller INSTRUCTION MANUAL 4-17
Chapter 4 Control Panel Setup
●
Check
You can check the current job settings and see how the printed job will look using the
Wait Mode on the printer driver screen to print out only one set of the print job for
checking before printing out multiple sets.
How to check the job - Wait Mode - Proof:
This method prints one set of the print job for checking after checking the settings
on the control panel.
On your computer:
1. Right click the printer icon and then click the properties to display the
printer properties dialog.
2. Select [Wait Mode] from the upper list of [Features] in [Paper] tab of the
printer properties window and select [Proof] from the list by clicking the
[
▼
] button of the lower box of the [Features].
3. Start to print.
On the control panel:
4. The [Printer Check Mode Screen] will appear on the LCD touch screen and
no printing is performed.
[HDD STORE] appears only when the optional HDD is installed in the main body printer.
5. Confirm the current settings.
6. Change setting values of [Print Quantity], [Duplex Mode] or [Image Shift], if
necessary.
•
How to change [Print Quantity]
Enter the value from the keypad on the control panel when the [Printer Check Mode
Screen] appears.
•
How to change [Duplex Mode]
To show the [Basic Screen], touch the [Duplex Mode]. Set the [Duplex Mode] on the
[Basic Screen]. To return to the [Printer Check Mode Screen], press the [CHECK]
button on the control panel.