manualshive.com logo in svg

Konica Minolta IP-601, Instruction Manual, Page: 55 / 131

Share
Download
Konica Minolta IP-601 Instruction Manual Download Page 55

Print Controller INSTRUCTION MANUAL  3-29

Chapter 3 Printer Driver Functions

Sheet Insertion - Advanced

Check the [Advanced] to use the different tray for each the inter-sheet.

When [Advanced] is selected, [Settings] can be performed.

Sheet Insertion - Settings

Open the [Sheet Insertion Advanced Settings] dialog for advanced setting.

Enter the number of pages per tray.

When [Advanced] is not selected, [Settings] can not be performed.

PI Cover Sheet

[PI Cover Sheet] inserts a sheet from PI tray as a Front cover and/or a Back
cover.

The settings you can select are as follows:

[Front], [Back], or [Front and Back]

[PI Cover Sheet] can not be performed in the following cases:

•

When [FS-108B Finisher] is not available

•

When [PI-108 Sheet Feeder] is not available

Restore Defaults

By clicking the [Restore Defaults] button, the [Cover] tab settings return to
defaults.

Summary of Contents for IP-601




































































































































Reviews:

No comments