manualshive.com logo in svg

Konica Minolta IP-601, Instruction Manual, Page: 104 / 131

Share
Download
Konica Minolta IP-601 Instruction Manual Download Page 104

5-12  Print Controller INSTRUCTION MANUAL

Chapter 5 Scanner Operation

[Application] - [Frame/Fold Erasure]

Allows you to enable/disable Frame/Fold Erasure setting.

The Fold Erasure mode cannot be used in combination with the Full-
image Area.

[Application] - [Full-image Area]

In this mode, the document is scanned completely to the edges.

This feature cannot be used in combination with Non-image Area Erase,
Reverse Image, or Frame/Fold Erasure.

[ROTATION OFF]

Use this feature not to rotate the original image automatically by 90 degrees
counterclockwise. The default is not selected.

In scanner mode, a print job is not sent from the print controller. When
the scanner function is not used, it is recommended to set up the printing
system in print mode or copy mode. When AUTO RESET is available,
control panel mode setting became in copy mode automatically.

Summary of Contents for IP-601




































































































































Reviews:

No comments