Konica Minolta IP-601, Instruction Manual, Page: 67 / 131

Print Controller INSTRUCTION MANUAL 3-41
Chapter 3 Printer Driver Functions
[Setup] Tab
Available options
This list shows available printer options. If you purchase this optional accessory
you can make the printer driver “aware” of it by selecting it from this list and
clicking the [Add] button. The selected option’s label will move into the list of
[Installed options].
Installed options
This list displays the selected options from the list of [Available options].
Add
When you click the [Add] button after selecting an option from the list of [Available
options] (such as Finisher, Hard Disk, Large Capacity Tray, Trimmer Unit, Punch
Unit etc.), the driver software will make the option available from that point on.
Remove
Clicking the [Remove] button after selecting an option from the list of [Installed
options] will remove the option from the list of [Installed options]. The option will
move to the list of available options, ready to install later.
Installed memory
You can select the amount of memory you have installed in your printer from the
list shown by clicking the [
▼
] button.
Your printer supports expansion up to 512 megabytes of RAM using standard
DIMM modules. It comes with 64 megabytes pre-installed on the print controller,
which should be sufficient for general office use.