Konica Minolta IP-601, Instruction Manual, Page: 64 / 131

3-38 Print Controller INSTRUCTION MANUAL
Chapter 3 Printer Driver Functions
Angle
Control the “lean” angle of the watermark by sliding this control back and forth
or by typing a number in the text value box from 0 degrees to 360 degrees (a
full circle all the way around).
Adjustment
Select [Move] or [Rotate] by clicking the radio button.
When [Move] is selected, you can move the watermark as you position it manu-
ally by clicking on the page sample and “dragging” the mark around.
When [Rotate] is selected, you can rotate the watermark as you position it manu-
ally by clicking on the page sample and “dragging” the mark around.
Show layout / Show single page
When [Show layout] button is clicked, you can preview how your [pages per
sheet] options selected in the [Options] tab will look with the current watermark
settings. The [Show layout] button will change to the [Show single page] button
by clicking it.
When the [Show single page] button is clicked, you can preview how the single
page will look with the current watermark settings. The [Show single page] button
will change to the [Show layout] button by clicking it.
New
When the [New] button is clicked, [Custom watermark n] appears in the [Text]
box. Create the new watermark text, to replace the current text by typing the new
text and pressing the [Enter] key. When the [Enter] key is pressed, the [Text
Change & Image Request] screen will appear. Click the [Yes] button, [No] button,
or [Cancel] button. When you click the [Yes] button, your newly created
watermark text will appear in the available-for-use list when you click the [
▼
]
button beside the [Text] box.
Delete
Click this to delete the current watermark.
You cannot undo this action, so be sure the currently-displayed
watermark is the one you wish to delete.
Restore Defaults
When the [Restore Defaults] button is clicked, the [Watermark - Restore Defaults
Request] screen will appear. Click [Yes] to restore the last saved settings for the
displayed watermark, or click [No] to reset the entire watermark list to the factory
default settings.