Konica Minolta IP-601, Instruction Manual, Page: 44 / 131

3-18 Print Controller INSTRUCTION MANUAL
Chapter 3 Printer Driver Functions
Password Print
When [Password Print] is checked, you can use password print (confidential
output) function to print the confidential documentation.
In this method, both settings on computer and the operation from the LCD touch
panel are used. Default is [Off].
Refer to “Chapter 4
■
Print Job
●
Password Print (Confidential Output)” (p. 4-21)
for password print procedure.
Settings
Open the [Password Print Settings] dialog for password setting.
Enter your user ID in the [UserID] text box. You can select any 8-digit number for
the User ID.
Enter your password in the [Password] text box. You can select any 8-digit
number or character for the Password. You can also select the following marks:
[ (space) ], [ . ], [ - ], [ _ ]
When the Password is entered, the password of [Job Combination Print Settings]
dialog for Password Print is replaced with the password of [Password Print
Settings] dialog.
You must enter the same password (5 digits or less) in the User ID text
box that you set up on the copier for Printer EKC.
If you do not enter the correct password or if you leave the User ID text
box blank, the print job is not performed and is registered as
Unsuccessful jobs. When in doubt about the password for Printer EKC,
ask your system administrator.
Features
Features use the special functions of the main body printer, with which you can
set up the various printing and finishing method.
When you select a function you would like to use from the upper list, an actual
setting of the function you selected will be shown on the lower box.
You can select the other setting of the function you selected from the list shown
by clicking the [
▼
] button of the lower box.
Features you can select are as follows: