Konica Minolta IP-601, Instruction Manual, Page: 29 / 131

Print Controller INSTRUCTION MANUAL 3-3
Chapter 3 Printer Driver Functions
●
Properties
You have two ways of selecting or changing settings through the printer driver.
(1) The first way is by going through [Start] - [Settings] - [Printers] - [Konica IP-
601 PCL] - [Properties].
Alternatively, you can select [Control Panel] - [Printers].
In case of Windows NT4.0, [Start] - [Settings] - [Printers] - [Konica IP- 601 PCL] -
[Konica IP- 601 PCL Default] is also available excluding [Setup] and [Options].
In case of Windows 2000, [Start] - [Settings] - [Printers] - [Konica IP- 601 PCL] -
[Konica IP- 601 PCL Printing Preferences] is also available excluding [Setup] and
[Options].
(2) The second way is to use applications to make settings each time you need
to produce printouts.
In advance, check to make sure of [Printer Name] by selecting [File] - [Print] -
[Print Dialog] on the application in use.
Settings made in the first way are effective when getting printouts, whatever the
application.
Settings made in the second way are effective only when the corresponding
application is running. When launching the application next time, settings made by
going though [Start] - [Settings] - [Printers] are applied.
Some of the interfaces to tabs and others are displayed differently by OSs.
Also, among the tabs there are some that are not shown depending on settings.
Incidentally, “Konica IP- 601 PCL” is the default printer name.
A different name may occasionally be given to the printer icon depending on the
system configurations or settings.