Konica Minolta CA-310, Instruction Manual

Page: 89 / 122

87
Communications
Section
2. Selecting the RS-232C Baud Rate
The RS-232C baud rate can be changed according to the setting made on the computer that is used for remote
measurement.
[Operating Procedure]
1
. Press the key.
The LCD display section will switch to the menu selection
screen.
2
. Press the key to open the RS232C baud rate
selection screen.
Each time the key is pressed, the screen will switch in the
order PROBE
→
SYNC
→
ID Name input
→
RANGE
→
Measurement Speed
→
Number of Digits
→
Calibration Stan-
dard
→
RS232C Baud Rate
→
PROBE.
3
. Press the key until the desired baud rate ap-
pears.
Each time the key is pressed, the baud rate switches in
the order 38400
→
19200
→
9600
→
4800
→
2400
→
1200
→
600
→
300
→
38400.
4
. Press the key to confirm the selection.
* By default (factory setting), the instrument is set so that [38400] will be selected automatically when the POWER switch is set to ON( | ).
* To cancel selection of RS-232C baud rate, press the
key.
<Notes when Selecting the RS-232C Baud Rate>
●
The specified RS-232C baud rate will be kept even if the POWER switch is set to OFF
(
O
)
.
The selected RS-232C baud rate will be effective when the POWER switch is set to ON( | ).
<Reference>
Communication parameter setting (RS-232C)
Set the same communications settings as those on the instrument to the computer.
Baud rate: 38400 (factory setting), 19200, 9600, 4800, 2400, 1200, 600, 300, BPS
Start bit: 1 bit
Character length: 7 bits (ASCII code)
Parity check: EVEN
Stop bit: 2 bits
PQRS
7
TUV
8
WXYZ
MENU
ALPHA
9
GHI
4
JKL
5
MNO LOCK
6
CAL
White
1
ABC
2
DEF - SPACE
3
ENTER
Red
0
Green
.
Blue
1
2
3
4
MENU : SELECT
PUSH SPACE KEY
SELECT : BAUD
38400
SELECT : BAUD
19200
SELECT : BAUD
9600
Press the
key until the
desired baud
rate appears.
Menu selection screen
RS-232C baud rate selection screen