Konica Minolta CA-310, Instruction Manual

Page: 44 / 122

42 42
4. Selecting the Number of Display Digits
The number of display digits can be selected from 4 or 3.
However, T(correlated color temperature) is always displayed in three digits, and flicker is always displayed up to
the first decimal place.
[Selecting Method]
1
. Press the key.
The LCD display will switch to the menu selection
screen.
2
. Press the key to open the number of
display digits selection screen.
Each time the key is pressed, the screen will switch
in the order PROBE
→
SYNC
→
ID Name input
→
RANGE
→
Measurement Speed
→
Number of Digits
→
Calibration standard
→
RS232C Baud Rate
→
PROBE.
3
. Press the key until the desired number
of display digits appears.
Each time the key is pressed, the number of dis-
play digits switches alternately between “4 FIGURES”
and “3 FIGURES”.
4
. Press the key to confirm the selection.
* By default (factory setting), the instrument is set so that “4 FIGURES”
will be selected automatically when the POWER switch is set to ON( | ).
* To cancel selection of the number of display digits, press key.
<Notes on Number of Display Digits Setting>
●
The selected number of display digits will be kept even if the POWER switch is set to OFF(
●
).
The selected number of display digits will be effective when the POWER switch is set to ON( | ).
PQRS
7
TUV
8
WXYZ
MENU
ALPHA
9
GHI
4
JKL
5
MNO LOCK
6
CAL
White
1
ABC
2
DEF - SPACE
3
ENTER
Red
0
Green
.
Blue
1
2
3
4
Press the key until
the desired number of
display digits appears.
MENU : SELECT
PUSH SPACE KEY
SELECT : DISP.
4 FIGURES
SELECT : DISP.
3 FIGURES
Menu selection screen
Number of display digits
selection screen