Konica Minolta 7915 Instruction Manual Download Page 217

Page: 217 / 284

Touch Panel Messages

Konica 7915/7920

10-7

CAUTION

Be careful not to spill toner inside the copier or get toner on your
clothes or hands.

➜

If toner gets on your hands, wash them using water and a neutral
soap.

➜

If toner gets in your eyes, immediately rinse them, and then consult a
medical professional.

CAUTION

Precaution for the disposal of the used toner bottle

➜

Do not throw away the used toner bottle; instead, keep it to be collect-
ed by your technical representative.

WARNING

Precautions for handling toner and the toner bottle:

➜

Do not throw toner or the toner bottle into a fire. Toner expelled from
the fire may cause burns.

Summary of Contents for 7915





























































































































































































































































































Search results

Summary of Contents for 7915

Reviews:

Related manuals for 7915

Brands by name

Popular brands

Konica Minolta 7915, Instruction Manual

Search results

Summary of Contents for 7915

Reviews:

Related manuals for 7915

Brands by name

Popular brands