Konica Minolta 7915, Instruction Manual

Page: 179 / 284

Administrator Mode Operations 9
Konica 7915/7920 9-3
To register access codes
1
In the Copy Track screen, touch
[ON], and then touch [Access #
Input].
The Access # Input screen appears.
2
Touch [Account #], and then touch
and to select the desired
account number.
❍
Registering a new access code
with an account number already
registered with an access code
changes the access code to the
new one.
❍ Although account numbers 1
through 99 are already regis-
tered as a default, they can be changed. For more details, refer to
“To change the account numbers registered” on page 9-4.
❍
To specify a new account number, erase a previously registered
account number.
3
Using the keypad, enter the four-
digit access code that you wish to
register. To register other access
codes, repeat steps 2 and 3 until the
desired access codes are regis-
tered.
? Do you wish to change the ac-
cess code of an account
number?
➜ Press the [C] (clear) key to erase the entered access code.
? Has registration of the entered access code been cancelled?
➜
If the entered access code is the same as one that has already
been registered, registration is cancelled. Try again using a differ-
ent access code.