Konica Minolta 7915 Instruction Manual Download Page 64

Page: 64 / 284

Copy Paper

4-4

Konica 7915/7920

Paper Types To Be Avoided

The following types of paper should not be used, otherwise decreased
print quality, paper misfeeds or damage to the copier may occur.

Overhead transparencies that have already been fed through the cop-
ier (even if the transparency is still blank)

Paper that has been printed on by a heat-transfer printer or an inkjet
printer

Paper that is either extremely thick or extremely thin

Folded, rolled, wrinkled, or torn paper

Perforated paper or paper with holes punched in it

Extremely smooth or extremely rough paper, or paper with an uneven
surface

Paper that has been treated, such as carbon-backed paper, or heat-
sensitive or pressure-sensitive paper

Paper that has been decorated with foil or embossing

Paper of various sizes

Paper of a non-standard shape (not rectangular)

Paper that is bound with glue, staples, or clips

Paper with labels attached

Paper with ribbons, hooks, buttons, etc. attached

Summary of Contents for 7915





























































































































































































































































































Search results

Summary of Contents for 7915

Reviews:

Related manuals for 7915

Brands by name

Popular brands

Konica Minolta 7915, Instruction Manual

Search results

Summary of Contents for 7915

Reviews:

Related manuals for 7915

Brands by name

Popular brands