Konica Minolta 7915, Instruction Manual

Page: 204 / 284

9 Administrator Mode Operations
9-28 Konica 7915/7920
❍
Check that the top margin of the
printed test pattern is 5.0 mm.
❍ If the top margin is not as
specified, touch
and to
adjust it, and then touch [Enter].
Setting a higher positive number
makes the margin wider; setting a
higher negative number makes
the margin narrower.
❍
Repeat step 2 until the top margin
meets its specification.
? Do you wish to make this adjust-
ment for other types of paper?
➜ Load the appropriate paper into
the multipurpose paper drawer
(1st drawer), change the paper type dial to the appropriate paper
setting, and then perform step 2.
3
In the Expert User’s Mode screen, touch [Exit].
4
In the Administrator Mode screen, touch [Exit].
5
In the Utility screen, touch [Exit].
a: 5.0 mm ± 1.0 mm
a