Kongskilde Z 455 H, Operator'S Manual

Page: 58 / 92

6 - WORKING OPERATIONS
Working position
Working position
To set the implement in working position proceed as
follows:
1. Raise the implement.
2. Move the lever (1) to the front.
NOTE: In this position the latch (2) is free from the
locking bolt (3) .
ZEIL17HT00131AA
1
Windrowing gear - Installation
The windrowing gear is a speed reducer (optional).
To install the windrowing gear proceed as follows:
1. Install the retaining ring (1) .
2. Install the gear (2) with an angle (X) equal to 60° on
the shaft (3) .
3. Install the retaining ring (4) .
Lock the gear (2) . Use the bolt (5) and the nut (6) .
ZEIL18HT00753AA
1
6-4