Kongskilde Z 455 H, Operator'S Manual

Page: 41 / 92

4 - OPERATING INSTRUCTIONS
4. Remove the wires that fix the implement on the pallet.
5. Lift the implement. Use a suitable lifting device.
6. Remove the pallet from the rear side of the imple-
ment.
7. Lower and secure the right-hand side and left-hand
side support feet.
8. Lower the implement.
9. Connect the implement to the tractor.
10. Connect the hydraulic hoses of the implement to the
tractor hydraulic system.
11. Connect one end of the rope to the hydraulic actuator.
12. Lift the implement slightly.
13. Act on the tractor hydraulic system to wing out slowly
the lateral rotor assembly.
14. Install all four support wheels in working position.
15. Install the safety panels on the left-hand side and on
the right-hand side.
16. Install the protective guard and the reflectors. See
Page 4-5 .
17. Install the rotor arms. See Page 4-4 .
4-3