Kongskilde Z 455 H, Operator'S Manual

Page: 53 / 92

5 - TRANSPORT OPERATIONS
5 - TRANSPORT OPERATIONS ###_5_###
Preparing for road transport
Transport position
Adjustment of the headstock with lateral
flotation equipment
NOTICE: Adhere to the maximum permissible axle loads,
total weights.
NOTICE: Adhere to the permissible transport measure-
ments.
NOTICE: Fit and check transport gear, traffic lights, warn-
ing and safety signalization and safety guards.
NOTICE: Make sure that in the transport position of the
implement, the tractor three-point linkage does not move.
NOTICE: When you drive on public roads with a lifted im-
plement, lock the lifting control lever to avoid unintentional
lowering.
Two mechanical safety locks (1) secure the left-hand side
rotor assembly and the right-hand side rotor assembly
when the implement is in transport position.
ZEIL18HT00952AA
1
To set the implement in transport position proceed as
follows:
1. Raise the implement.
2. Move the lever (2) to the rear to lock the headstock.
NOTE: In this position the locking bolt (4) locks the
latch (3) .
ZEIL17HT00131AA
2
5-1