Kongskilde Z 455 H, Operator'S Manual

Page: 42 / 92

4 - OPERATING INSTRUCTIONS
Installation of the rotor arms
To install the pre-assembled rotor arm (3) on to hub (2) ,
use:
• Install the hexagonal head bolt and the locknuts for
each arm.
• Torque the bolt
(1) to 85 N·m ( 752 lb in ).
NOTE: Record the sense of rotation (A) of the rotors.
After the installation of the rotor arms check that the arms
of the inner and outer rotors are perfectly aligned to each
other.
ZEIL18HT00737AA
1
You can change the tine angle from the standard value.
See Page
6-2 .
4-4