Kongsberg EM 122, Installation Manual

Page: 64 / 154

EM 122
Acceptable transients
• Short time (max. 2 sec) : ± 20%, 42 – 69 Hz
• Spikes (max. 50µs) : < 1000 V
Transceiver Unit:
• 0.5° x 1°: < 2000W
• 1° x 1°: < 2000W
• 1° x 2°: < 1900W
• 2° x 2°: < 1200W
• 2° x 4°: < 1200W
• The single phase supply must be protected with 16A (230 Vac supply) slow-blow
fuses.
Operator Station: < 250W
LCD monitor:
< 60W
Preamplifier Unit: < 200W
TX Junction Box: None
Note
For 115 Vac operation, please contact km.hydrographic.support@kongsberg.com
Power interrupts
Menu settings, all parameters and the sound speed profile are stored on the Operator
Station's harddisk during operation, so operation can continue after power interruption.
However, the file system may be damaged, so the use of an uninterruptable power supply
(UPS) is highly recommended.
Environmental and EMC specifications
The system meets all requirements of the IACS E10 specification. The Transceiver
and Preamplifier Unit meet the additional stronger requirements of the IEC 60945
specification.
The Operator Station and the LCD monitor are both IP22 rated. The Transceiver and
Preamplifier Unit are IP54 rated.
Standards
EMC Noise emission: EN55022 (Class A)
EMC Noise immunity, voltage spikes: EN55101
IEC 60945 specification
62
317669/B