Kongsberg EM 122, Installation Manual

Page: 67 / 154

Cable layout and interconnections
Shipyard and system cables
Each individual cable is identified on the cable plan. The cables fall into two categories
• Cables provided by the installation shipyard or owner
• System cables supplied with the delivery
Shipyard cables
The cables that must be provided by the shipyard or owner are identified as such in the
descriptions. Note that the cable specifications given are the minimum specifications.
For each cable, the following information is provided
• Connection to be made on each end of the cable (including system unit, terminal
board identification and plug/socket to be used)
• Number of cores
• Recommended cable type
• Minimum cable specifications
The necessary considerations must be taken to suit special requirements. Kongsberg
Maritime accepts no responsibility for damage to the system or reduced operational
performance if this is caused by improper cabling.
System cables
Several cables will be supplied with the system. Such cables normally comprise power
cables for peripheral equipment, and interconnection cables for computers and/or work
stations. These cables will normally be delivered with the units.
317669/B
65