Kongsberg EM 122, Installation Manual

Page: 136 / 154

EM 122
Generic RS-232 Serial line
This cable comprises a multi purpose serial line. It provides interface with any peripheral
unit. One end of the cable connects to the local unit
(DTE)
with a 9-pin D-connector,
while the other connects to the peripheral
(DCE)
as described in the peripheral unit's
documentation.
In many cases, only the
RxD
,
TxT
and
GND
pins are used. Twisted pairs are sufficient
in the cable.
(104)
Rev .D
Standard RS-232 serial line
1
2
3
4
6
9
8
7
5
Carrier Detect (DCD)
Receive Data (RXD)
Transmit Data (TXD)
Data Terminal Ready (DTR)
System ground (GND)
Data Set Ready (DSR)
Request to Send (R TS)
Clear to Send (CTS)
Ring Indicator (RI)
View
Local (DTE) 9-pin
‘ D ’ connector
Remote unit (DCE) to
be connected as described
in applicable documentation
Screen
To plug
housing
5 1
6 9
1 5
9 6
Looking into
female 9-pin
D-pin connector
Looking into
male 9-pin
D-pin connector
Cable specifications
• Conductors: 5 x 2 x 0.5 mm²
• Screen: Screened twisted pairs and overall braided
• Voltage: 60 V
• Maximum diameter: Limited by the plugs
134
317669/B