Komatsu PW98MR-10, Operation & Maintenance Manual

Page: 148 / 446

Setting the camera display in travelling on street mode
1.
Select “Camera view mode” (4), then press key F6.
2.
Select the camera display mode when reverse gear is engaged:
“Normal”: the camera is not displayed.
“Reverse synchronisation”: the camera is automatically
displayed with a full screen.
On this screen, it is possible to perform the following operations
with switches F3 to F6.
F3: Moves to the next item (1 line below). When on the last
line, it moves to the first line on the next page.
F4: Moves to the previous item (1 line above). When on the
first line, it moves to the last line on the previous page.
F5: Cancels the change and returns the screen to “Screen Ad-
justment (Camera)” screen.
F6: Accepts change and returns to “Screen Adjustment (Camera)” screen.
CLOCK ADJUSTMENT
“Clock Adjustment” menu is used to change the setting of the clock displayed on the standard screen of the
monitor.
1.
Select “Clock Adjustment” (3) on “Monitor Setting” menu
screen, then press switch F6. The screen switches to
“Clock Adjustment” screen for selecting a menu.
The following 5 items can be changed.
(a): “GPS Synchronization”
(b): “Calendar”
(c): “Time”
(d): “12h/24h Mode”
(e): “Daylight Saving Time”
REMARK
• “Calendar” (b) and “Time” (c) need to be readjusted
since they are reset after a long-term storage.
• When “GPS Synchronization” is set to ON, the above
are automatically readjusted. While “GPS Synchroni-
zation” is ON, you cannot select the menus of “Calen-
dar” (b) and “Time” (c).
2.
Perform the following setup procedure by operating
switches F3 to F6 on the selection menu screen for “Clock
Adjustment”.
RKA54661
RKA54670
EXPLANATION OF COMPONENTS OPERATION
3-80
WENAM00061