METHOD FOR STOPPING ENGINE
k
k
WARNING
Keep away from the exhaust pipe immediately after stopping the engine.
NOTICE
If the engine is stopped abruptly, the service lives of com-
ponent parts of the engine may be considerably reduced.
Do not stop the engine abruptly except in an emergency.
Do not stop the engine abruptly except the case in an
emergency. If the engine is overheated, do not try to stop it
abruptly but run it at medium speed to allow it to cool
down gradually, and then stop it.
Stop the engine according to the following procedure.
1.
Run the engine at low idle for approximately 5 minutes to cool it down gradually.
2.
Turn the key in starting switch (1) to OFF position (A).
The engine will stop.
3.
Remove the key from starting switch (1).
RKA48654
OPERATION
MACHINE OPERATIONS AND CONTROLS
3-163
WENAM00061
Summary of Contents for PW98MR-10
