Komatsu HD785-5, Operation & Maintenance Manual

Page: 112 / 307

.
OPERATION
OPERATION
ADJUST SEAT BELT
WARNING
Before fastening the seat belt, check that there is no problem in the securing brackets or belt. If there is any wear or damage,
replace.
Even if there appears to be no problem in the seat belt, replace the seat belt once every 3 years. The date of manufacture is
woven on the reverse side of the belt.
Adjust and fasten the seat belt before operating the machine.
Always use the seat belt when operating the machine.
Do not use the seat belt with either half of the belt twisted.
Fastening and removing belt
1. Sit on the seat, depress the brake pedal fully, and adjust the
seat so that your back is pressed against the backrest.
2. Sit on the seat, take buckle (1) and tongue (3) in your left and
right hands, insert tongue (3) into buckle (1), and pull the belt
to check that it is securely locked.
3. When removing the belt, press button (2) of buckle (1) to
release the belt.
Fasten the belt along your body without kinking it. Adjust the
lengths of the belt on both the buckle and the tongue sides so
that the buckle is located at the front, mid-point of your body.
Adjust belt length
To make belt shorter:
Pull the free end of the belt at the buckle end or tongue end.
3 - 66