Komatsu H75051, Operation & Maintenance Manual

Page: 142 / 440

2.
Select “ON” or “OFF”, then press ENTER switch (1).
“ON”
Displays the reference line.
“OFF”
Hides the reference line.
REMARK
For the rearview monitor and the reference line, see “HANDLE
REAR VIEW MONITOR (3-123)” and “METHOD FOR AD-
JUSTING REAR VIEW CAMERA ANGLE (3-167)”.
This setting is held even if the starting switch is turned to OFF position.
The default is “ON”.
REVERSE-INTERLOCK ENABLED MODE
In this mode, display method of rear view monitor can be changed by switching ON/OFF.
1.
Select “Reverse-interlock Selection mode” on the “Rear-
view Monitor Setting” menu, then press ENTER switch (1).
2.
Select “ON” or “OFF”, then press ENTER switch (1).
“ON”
Displays images on the rear view monitor only when trav-
eling in reverse.
“OFF”
Always displays images on the rear view monitor.
REMARK
This setting is held even if the starting switch is turned to OFF
position.
The default is “OFF”.
EXPLANATION OF COMPONENTS OPERATION
3-76