Komatsu H75051, Operation & Maintenance Manual

Page: 160 / 440

CIGARETTE LIGHTER
The cigarette lighter is used to light cigarettes.
When the cigarette lighter is pushed in, it will return to its origi-
nal position after a few seconds, so pull it out to use it.
If the cigarette lighter is removed, the socket can be used as an
85 W (24 V x 3.5 A) power supply.
NOTICE
This cigarette lighter is for 24 V. Do not use this as a power
supply for 12 V equipment.
LAMP SWITCH
The lamp switch is used to light up the headlamps, clearance
lamps, tail lamps, and machine monitor.
Position (a): OFF
Position (b): Clearance lamps, tail lamps, and machine monitor
light up.
Position (c): Headlamps light up together with the lamps lit in
position (b).
REMARK
The lamp switch can be operated regardless of the turn signal
lever position.
DIMMER SWITCH
The dimmer switch is used to switch the headlights between
high and low beams.
Position (L): Low beam
Position (H): High beam
TURN SIGNAL LEVER
The turn signal lever is used to operate the turn signal lamp.
Position (L): The left turn (when the lever is pushed forward).
Position (N): OFF
Position (R): The right turn (when the lever is pulled backward).
REMARK
• When the lever is operated, the turn signal pilot lamp also
flashes.
• The lever returns automatically when the steering wheel is
turned back. If the lever does not return, move it by hand.
EXPLANATION OF COMPONENTS OPERATION
3-94