Komatsu H75051, Operation & Maintenance Manual

Page: 154 / 440

• When you press menu switch (2) on the “Operator ID
Change” screen, a message is displayed below and
the screen returns to the “Monitor Setting” menu
screen.
On the “Monitor Setting” menu screen, as the same
way when the starting switch is ON and “SKIP” is se-
lected, “****” is displayed in the column of “Operator
ID”.
In this case, the operator ID is not identified.
• When you press ENTER switch (1) after inputting the
ID which is not registered to the “Operator ID Change”
screen, a message is displayed below and the screen
returns to the “Monitor Setting” menu screen.
In this case, the identified ID is not changed.
• On the “Operator ID” screen, if no switch is operated
for more than 30 seconds, the screen automatically
changes to the “Monitor Setting” menu screen.
In this case, the identified ID is not changed.
WHEN OPERATOR IDENTIFICATION FUNCTION IS AVAILABLE WITHOUT SKIP
When the operator identification function is available without
SKIP, the identified ID number is not displayed in the “Operator
ID” column of “Monitor Setting” screen.
1.
Select “Operator ID” on the “Monitor Setting” menu screen,
then ENTER switch (1) for 1 second.
2.
The “Operator ID Change” screen is displayed.
EXPLANATION OF COMPONENTS OPERATION
3-88