REMARK
• When the regeneration is disabled, the aftertreatment devi-
ces regeneration disable pilot lamp (2) is lit on the stand-
ard screen.
• The setting of the regeneration disable is canceled by turn-
ing starting switch to OFF position. When the automatic re-
generation needs to be kept disabled, perform the above
procedure each time you start the engine.
• During the regeneration to protect the system, even if the
regeneration disable is set, Aftertreatment Devices Regen-
eration pilot lamp (3) may light up, but this does not indi-
cate abnormality. Also, during the regeneration to protect
the system, the regeneration disable cannot be operated.
• When the regeneration is performed to protect the system,
the exhaust temperature is lower than that of when the re-
generation is performed to burn soot, and is almost the
same level as the normal exhaust gas temperature.
While regeneration is being performed: Regeneration is disabled
(When the aftertreatment devices regeneration pilot lamp (3) is lit on the standard screen)
1.
When switch F6 is pressed on the standard screen, the Af-
tertreatment Devices Regeneration screen is displayed.
OPERATION
EXPLANATION OF COMPONENTS
3-121
Summary of Contents for D155AX-8E0
