Komatsu D155AX-8E0, Operation & Maintenance Manual

Page: 107 / 420

Setting and saving each item
1.
Press switch F3 or F4 on the customize mode select
screen to set the yellow cursor to the target item of setting
change and press F6 key.
The setting change screen for the selected item is dis-
played.
2.
Press switch F3 or F4 to move the yellow cursor to a set-
ting to change, and press switch F6.
(The figure shows an example of the setting change
screen when the working mode is selected.)
3.
After changing the setting of each item, press switch F2.
The memory saving screen is displayed.
4.
Check the setting of each item (on the left of the screen).
5.
Press switch F3 or F4 to move the yellow cursor to a mem-
ory number (M1 to M5) to save, and press switch F6.
The setting is saved by the above operation.
Memory call up procedure
1.
On the customize mode selection screen, press switch F1.
The mode memory call screen is displayed.
OPERATION EXPLANATION OF COMPONENTS
3-45