33
FIG-13. Suspension Arm
KNUCKLE
Take off the cotter pin (a-1)
Loosen the nut (a-2)
Remove the steering tie-rod ass’y (a-3)
(Photo 49)
Take off the cotter pin (a-1)
Loosen the insert lock nut (a-2)
Remove the washer (a-3)
Remove the knuckle (a-4)
(Photo 50)
SUSPENSION ARM
Loosen the bolts (a-1) with the suspension (a-2)
Loosen the bolts (a-3) and nuts (a-4) with the frame
body (a-5)
(Photo 51)
CAUTION
1. The suspension arm marked “R” is for
the right side.
2. The suspension arm marked “L” is for the left side.
3. The knuckles are marked “R” or “L”, please pay
attention the differences while mounting.
4. Before mounting knuckle, please smear grease on the
knuckle.
5. Mount the knuckle on the suspension arm and tighten
the nut and put on the cotter pin.
6. Please check the refill grease on it frequently.
Summary of Contents for 180??
