Kolpin Powersports 180??, Service Manual

Page: 33 / 87

31
FIG-11. Rear Brake
RIGHT FOOTWELL BOTTOM BOARD
Loosen the bolts (a-1)
Remove the right footwell bottom board (a-2)
(Photo 41)
REAR BRAKE CABLE FIXED HOLDER
Loosen the nuts (a-1) on the rear brake cable (a-2)
(Photo 42)
Loosen the bolts (a-1)
Remove the switch spring (a-2)
Remove the rear brake cable fixed holder (a-3)
Remove the wave washer (a-4)
(Photo 43)
HYDRAULIC CYLINDER LEVER
Loosen the bolts (a-1)
Remove the master cylinder (a-2)
Remove the hydraulic cylinder lever (a-3)
Remove the hydraulic parallel pin (a-4)
Remove the hydraulic cotter pin (a-5)
(Photo 44,45)
PENDANT BRAKE LEVER
Remove the spring (a-1)
Remove the front pedal brake connected cable (a-2)
Remove the pendant brake lever (a-3)
(Photo 46)
Note:
For detailed Rear brake disassembling refer
to FIG-20
Refer to the preceding disassembly instructions for
re-assembly.