42
FIG-18. Engine Disassembly
LUBRICATION
ENGINE OIL & FILTER CHANGE
Remove the oil filter cap and the oil drain bolt. (a-1)
(Photo 3)
NOTE:
drain the oil while the engine is warm to ensure
complete draining.
Remove the oil filter cap (a-1), spring (a-2) and oil filter
screen. (a-3)
Check the O-ring for damage or fatigue. (a-4)
Install a new oil filter screen and spring then install the
cap.
(Photo 4)
Install a new oil filter screen and spring then install the
cap.
Install the oil drain bolt with sealing washer.
TORQUE: 20~30 n-m (2.0~3.0 kg-m)
Fill the crankcase with recommended oil.
Install the oil filter cap. (a-1)
(Photo 5)
ENGINE OIL CAPACITY: 1.2 liter at draining.
Install the oil level gauge.
Start the engine and let it idling for 2 or 3 minutes.
Stop the engine and check that the oil level at the upper
line on the gauge. Make sure there are no oil leaks.
Summary of Contents for 180??
