Kolpin Powersports 180??, Service Manual

Page: 32 / 87

30
FIG-11. Rear Brake
MASTER CYLINDER SUB
Brake fluid level must be below the maximum level
Fill with fluid when the level is below the “min” line
(a-1)
(Photo 37)
CALIPER ASS'Y
Check the brake pad kit, when the friction material is
worn away, pads must be changed to a new set (a-1)
(Photo 38)
Loosen the bolts (a-1)
Remove the caliper ass’y (a-2)
Loosen the bolts (a-3) on the caliper
Remove the brake pad kit (a-4)
(Photo 39)
CAUTION
1. When changing the brake pad kit, be careful not to
allow grease to touch the brake pad kit
BRAKE HOSE
To let out the brake oil
Loosen the bolts (a-1)
Remove the brake hose (a-2) and plain washer (a-3)
(Photo 40)
CAUTION
1. When changing the brake hose, replace the plain
washer if damaged.