Kollmorgen
Mounting and Wiring
SILVER
LINE
®
Product Family
4-1
Section 4
Mounting and Wiring
4.1 INTRODUCTION
This chapter provides information concerning safety, unpacking, inspection, and installation for the S/O and the
SPS/R. Read the entire chapter carefully.
Most installation problems are caused by incorrect wiring or poor
wiring practices.
4.2 SAFETY INFORMATION
This section will alert you to possible safety hazards associated with this equipment and the precautions you can take
to reduce the risk of personal injury and damage to the equipment.
Safety notices in this manual provide important information. Read and be familiar with these instructions before
attempting installation, operation, or maintenance. Failure to observe these precautions could result in serious bodily
injury, damage to the equipment, or operational difficulty.
The safety-alert symbols are illustrated above. When you see these symbols in this manual, be alert to the potential
for personal injury. Follow the recommended precautions and safe operating practices included with the alert
symbols.
WARNING
refers to personal safety and alerts you to potential danger or harm. Failure to follow warning notices
could result in personal injury or death.
CAUTION
directs attention to general precautions which, if not followed, could result in personal injury and/or
equipment damage.
NOTE
highlights information critical to your understanding or use of these products.
CAUTION
WARNING
NOTE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
