21
Mixer mincer machine accessories
The following accessories are included in the scope of
delivery depending on machine model:
28 = Insert ring, narrow (only for the Unger cutting system)
29 = Insert ring, wide (only for the Unger cutting system)
34 = Combination hook wrench for MWK32-45 / MWK32-
80 / MW32-80
38 = Combination hook wrench for MWK114-45 /
MWK114-80 / MW114-80
39 = Splatter guard (only for the Enterprise cutting system)
37
16
38
29
28
35
36
20
15
↷
↷
34
39
Disassembly of the mincer housing and mixing
blade
The mincer housing (15) is easily removable for quick and
thorough cleaning. After loosening the attachment bolts
(20), remove the mincer housing (15) towards the front
while pivoting it to the right, as shown in the picture.
After loosening both front tommy nuts (35) by hand, remove
the mixing blade bracket (36) towards the front while rotating
it slightly to the right and while simultaneously holding the
mixing blade (37) firmly with the other hand. Pull the mixing
blade (37) out of the rear attachment and remove it by tilting
it slightly upwards.
15 = Mincer housing
20 = Mincer housing attachment bolts
35 = Tommy nuts for mixing blade bracket
36 = Mixing blade bracket
Mixer equipment
The separately switchable mixer equipment serves the raw
product blending of different meat types, as well as the
mixing of herbs and spices prior to mincing.
The mixing blade (37), the mincer feed screw (16) and the
mincer housing (15) are designed in such a manner that the
meat is fed quickly and gently to the cutting set, where it
minced to the desired granulation.
Attention:
The meat mincer can be switched ON only when the
protective cover (5) is closed.
16 = Mincer feed screw
37 = Mixing blade