20
34
6
34
20
34
15
Disassembly of the cutting set and mincer feed
screw
Daily maintenance and checks are performed quickly and
easily using the KOLBE combination tool. As depicted in
the picture, the combination hook wrench (34) is used to
loosen the locking nut (6), for disassembly of the cutting set
or mincer feed screw (16) and for disassembly of the mincer
housing (15).
On Enterprise cutting systems, the combination hook
wrench (34) is used for loosening and tightening the locking
nut (6).
On the Unger cutting system, the combination hook wrench
(34) is suitable only for opening the locking nut (6). Tightening
of the locking nut is done only by hand at all times.
6 = Locking nut
34 = Combination hook wrench
Insert the combination hook wrench (34) precisely onto the
cutter stub slot as shown in the picture and carefully extract
the mincer feed screw incl. cutter set using both hands.
34 = Combination hook wrench
Using a ring spanner SW24 opening on the combination
hook wrench (34), loosen the mincer housing (15)
attachment bolts (20) for disassembly.
15 = Mincer housing
20 = Attachment bolts
34 = Combination hook wrench