Kolbe Foodtec MW114-80 Operating Manual Download Page 15

15

Mixer mincer machines MWK32-45 / MWK114-45

 

The KOLBE MWK32-45 mixer mincer machine with 
Enterprise E32 cutting system is designed for the production 
of large quantities of minced meat.

The KOLBE MWK114-45 mixer mincer machine with Unger 
D114 cutting system is designed for the production of large 
quantities of meat and sausage products.

The standard mobile models are particularly suited to 
applications in cold storage rooms. 
The non-rusting design of the machine stand, mincer 
hopper, mincer housing, mincer feed screw and locking nut 
meets the highest hygiene requirements.

The powerful 

3,0 kW or 4,0 kW drive performance

 and 

motor protection features, along with the limit switch 
secured protective cover (5), guarantee a high degree of 
operational safety. 

1 = ON - button for mixing 
2 = ON - button for mincing
3 = OFF - mushroom-head STOP button
4 = Mains switch  
5 = Protective cover
6 = Locking nut
7 = Access openings for cleaning
8 = Fixed castors
9 = Steerable castors with Allstopp locking devices

1
2

4

3

5

8

9

7

6

Mixer mincer machines MWK32-80 / MWK114-80 
/ MW32-80 / MW114-80

 

The KOLBE MWK32-80 / MW32-80 mixer mincer machine 
with Enterprise E32 cutting system is designed for the 
production of large quantities of minced meat.

The KOLBE MWK114-80 / MW114-80 mixer mincer 
machine with Unger D114 cutting system is designed for 
the production of large quantities of meat and sausage 
products.

The standard mobile models are particularly suited to 
applications in cold storage rooms. 
The non-rusting design of the machine stand, mincer 
hopper, mincer housing, mincer feed screw and locking nut 
meets the highest hygiene requirements.

The powerful 

3,0 kW, 4,0 kW or 5,0 kW drive performance

 

and motor protection features, along with the limit switch 
secured protective cover (5), guarantee a high degree of 
operational safety. 

1 = ON - button for mixing 
2 = ON - button for mincing
3 = OFF - mushroom-head STOP button 
5 = Protective cover
6 = Locking nut
7 = Access openings for cleaning
8 = Fixed castors
9 = Steerable castors with Allstopp locking devices

1

2

3

5

8

9

7

6

Summary of Contents for MW114-80































Reviews: