Kohzu Precision RC-010, Manual

Page: 52 / 58

SC-021/RC-010 Introduction Manual /Practical Version
48
Md PE Ax Sp Val
B A C K L A S H T Y P E 0 - 4
0 8
：
1 N
Md PE Ax Sp Val
B A C K L A S H T Y P E 0 - 4
0 8
：
1
0
Change setting item
Md PE Ax Sp Val
S T A R T S P E E D ( p p s )
0 1
：
1 0 0 0 0 0 5 0 0
Md PE Ax Sp Val
B A C K L A S H T Y P E 0 - 4
0 8
：
1 0
Input number
Into data entry
7.
Manually Performing Backlash Correction
《
Setting Backlash Correction Command
》
System Setting Item 8
<Backlash correction commands>
No. Description of backlash correction
0 The backlash correction is null .
1
When reversing from CW to CCW direction, reciprocating movements are performed by the correction
pulse numbers before moving .
2
When reversing from CCW to CW direction, reciprocating movements are performed by the correction
pulse numbers before moving .
3
In CCW direction, reciprocating movements are performed by the correction pulse numbers after
moving is ended .
4
In CW direction, reciprocating movements are performed by the correction pulse numbers after
moving is ended .
ⅲ)
Referring to the table below, enter the desired backlash correction code using the keypad
(default is set to 0)
ⅳ)
Press “ SET ” button again when finished.
ⅰ
) Change setting item number to “No.8” at system setting status by moving dial-key up or down.
ⅱ
) Press “ SET ” button to access into data entry screen .
Dial-key moving up or down
Press ”SET”
Fix the setting
Enter
backlash
correction
code
Press ”SET”