SC-021/RC-010 Introduction Manual /Practical Version
37
Md
PE
Ax
Sp
Val
P L S C A L
D I V
1 / N
1 0
：
1
0 0 0 0 0 0 0 1
Md
PE
Ax
Sp
Val
P L S C A L
D I V
1 / N
1 0
：
1
N N N N N N N N
Md
PE
Ax
Sp
Val
S T A R T S P E E D ( p p s )
0 1
：
1
0 0 0 0 0 5 0 0
Md
PE
Ax
Sp
Val
P L S C A L
D I V
1 / N
1 0
：
1
0 0 0 0 0 0 0
１
Change setting item
Into data entry
Input number
This process allows operator to convert fed pulse into real travel distance/angle. Process must
be completed prior to changing display data, explained on pages 50-52.
Caution: The default setting for the number of digits to be displayed is set to (2). Conversion
results that exceed two digits will be displayed incorrectly. To increase the number of digits
displayed, see page 39 “Setting Number of Displayed Digits”.
4.
Converting Pulse Number to Real Distance/Angle
《
Setting Conversion Coefficient
》
System Setting Items 10 & 11
(A) Setting Conversion Coefficient Denominator
(System Setting Item 10)
ⅲ)
Using the keypad, enter the desired coefficient denominator.
ⅳ)
Press “
SET
” button again when finished.
ⅰ
)
Change setting item number to
“No.10”
at system setting status by moving dial-key up or down.
ⅱ
)
Press “
SET
” button to access
data entry screen
.
Dial-key moving up or down
Press ”SET”
Press ”SET”
Fix the setting
Enter
coefficient
denominator.
