Kohler PW 9000DPA, User Manual

Page: 50 / 86

4: Operation
4-4
UPS306-01-00 PowerWAVE 9000 DPA User Manual Dated 01-06-2010
4.3.2 Main menu screen
4.3.3 Event log menu screen
4.3.4 Measurements menu screen
DESCRIPTION LCD-DISPLAY
1. A log of the last 64 events is stored in the Power Management Display
(See paragraph 4.3.3) .
→
EVENT LOG
MEASUREMENTS
2. Allows monitoring of voltages, power, frequencies, currents, autonomy
etc
(See paragraph 4.3.4)
→
MEASUREMENTS
COMMANDS
3. Enables the commands “Load to inverter”, “Load to bypass” and battery
test to be executed
(See paragraph 4.3.5) .
→
COMMANDS
SET-UP DATA
4. Allows the UPS personalized information (such as serial number) to be
entered
(See paragraph ) .
→
SET-UP DATA
SET-UP USER
5. Allows user to set up Date/Time, automatic battery test, etc.
(See paragraph 4.3.7)
→
SET-UP USER
SET-UP SERVICE
6. Password-protected area for service engineer use only (See paragraph
4.3.8) .
→
SET-UP SERVICE
DESCRIPTION LCD-DISPLAY
1. Logging Control; a log of the last 64 events is stored in the Power
Management Display.
01 05-10-08
14-38-56
LOAD TO INV.
2. Every stored event is identified with a sequential number and time
stamp.
02 05-10-08
14-38-59
LOAD TO BYP.
3. By pressing
ENTER
the code of the event will be displayed.
03 05-10-08
14-39-14
LOAD OFF
DESCRIPTION LCD-DISPLAY
1. Battery Runtime
BATT. RUN TIME (MIN)
00h 00mm
2. UPS-Output Frequency
OUTPUT FREQUENCY (HZ)
50.00
3. Bypass Frequency.
BYPASS FREQUENCY (HZ)
50.00
4. Battery Voltage
BATTERY VOLTAGE (V)
+0.0 - 0.0
5. Battery Charger Current
BATT. CHARGE CUR. (A)
+ 0.0 - 0.0
6. Battery Discharge Current.
DISCHARGE CURRENT (A)
00.00
7. Rectifier Input Voltage (all three phases)
RECTIFIER VOLTAGE (V)
00.00 00.00 00.00
8. Bypass Input Voltage (all three phases)
BYPASS VOLTAGE (V)
00.00 00.00 00.00