TP-6255 7/06
23
Section 2 Scheduled Maintenance
Section 2 Scheduled Maintenance
2.1 General
Schedule routine maintenance using the service
schedule located in the generator set operation manual
and the runtime hours shown on the ADC 2100. If the
generator set will be subject to extreme operating
conditions, service the unit accordingly.
Note:
See the generator set operation manual for the
service schedule and other service not included
in this manual.
Note:
High-mineral content seawater (salt water) can
cause rapid destruction of metals. Wipe up all
salt water spillage on and around the generator
set
and
keep
metal
surfaces
free
from
accumulated salt deposits.
Accidental starting.
Can cause severe injury or death.
Disconnect the battery cables before
working
on
the
generator
set.
Remove the negative (--) lead first
when
disconnecting
the
battery.
Reconnect the negative (--) lead last
when reconnecting the battery.
WARNING
Disabling the generator set.
Accidental starting can
cause severe injury or death.
Before working on the
generator set or connected equipment, disable the generator
set as follows: (1) Move the generator set master switch to the
OFF position. (2) Disconnect the power to the battery charger.
(3) Remove the battery cables, negative (--) lead first.
Reconnect the negative (--) lead last when reconnecting the
battery. Follow these precautions to prevent starting of the
generator set by an automatic transfer switch, remote
start/stop switch, or engine start command from a remote
computer.
Rotating parts.
Can cause severe injury or death.
Operate the generator set only when
all guards, screens, and covers are in
place.
WARNING
Servicing the generator set when it is operating. Exposed
moving parts can cause severe injury or death.
Keep
hands, feet, hair, clothing, and test leads away from the belts
and pulleys when the generator set is running.
Replace
guards, screens, and covers before operating the generator
set.
Sound shield removal. Exposed moving parts can cause
severe injury or death.
The generator set must be operating
in order to perform some scheduled maintenance procedures.
Be especially careful if the sound shield has been removed,
leaving the belts and pulleys exposed.
(Sound-shield-equipped models only)
Summary of Contents for 6.5-27EFOZD
